Covestro Bayblend® PC ABS Resin
Bayblend® PC ABS
Bayblend® variants (PC+ABS) exhibit an excellent balance of properties, most notably high toughness – even at cold temperatures – as well as rigidity, dimensional stability, excellent creep resistance, low moisture absorption, heat resistance and high flame retardancy.
Bayblend PC/ABS available for bulk purchase
| Type | Grade No. | Manufacturer | Brand | Grade/Features | Use/Applications |
|---|---|---|---|---|---|
| PC ABS | 2953 | Covestro | Bayblend | Electroplating Grade. Vicat/B 120 temperature = 113 °C | Injection molding; Electroplating |
| PC ABS | FR3020 | Covestro | Bayblend | Flame retardant grade. 5 % mineral filled;Vicat/B 120 temperature = 103 °C; HDT/A ≥ 85 °C; very good UL recognition in small wall thicknesses (V-0 at 0.75 mm); low smoke density | Injection molding; Thin-wall applications |
| PC ABS | FR3021 | Covestro | Bayblend | Flame retardant grade. 15 % mineral filled;Vicat/B 120 temperature = 98 °C; high stiffness; tensile modulus = 4800 MPa; UL recognition 94 V-0 at 1.5 mm; glow wire temperature (GWFI): 960 °C at 2.0 mm | Injection molding |
| PC ABS | FR3010 RE | Covestro | Bayblend | Flame retardant grade. Vicat/B 120 temperature = 110 °C; increased heat resistance; UL recognition 94 V-0 at 1.5 mm; glow wire temperature (GWFI): 960 °C at 2.0 mm; improved chemical resistance and stress cracking behavior | Injection molding |
| PC ABS | FR3021 RE | Covestro | Bayblend | Flame retardant grade. 15 % mineral filled; Vicat/B 120 temperature = 98 °C; high stiffness; tensile modulus = 4800 MPa; UL recognition 94 V-0 at 1.5 mm; glow wire temperature (GWFI): 960 °C at 2.0 mm | Injection molding |
| PC ABS | T45 PG | Covestro | Bayblend | Electroplating grade. Vicat/B 120 temperature = 112 °C. Impact resistant | Injection molding; Electroplating |
| PC ABS | T65 HI | Covestro | Bayblend | high impact grade. Vicat/B 120 temperature = 120 °C; grade with improved low-temperature impact strength and chemical resistance | Injection molding; Automotive parts; Also suitable for extrusion/extrusion blow molding and electroplating applications |
| PC ABS | T65 PG | Covestro | Bayblend | Electroplating grade. Vicat/B 120 temperature = 120 °C; easy flowing; good heat resistance | Injection molding; Electroplating |
| PC ABS | T80 XG | Covestro | Bayblend | General Purpose Grade. Vicat/B 120 temperature = 130 °C; excellent flow; optimized surface quality for metallization (steam treatment); Impact resistant | Injection molding |
| PC ABS | T85 HG | Covestro | Bayblend | General Purpose Grade. Vicat/B 120 temperature = 130 °C; easy flowing; high gloss; brilliant colors; Impact resistant, Heat resistant | Injection molding |
| PC ABS | T90 XG | Covestro | Bayblend | General Purpose Grade. Vicat/B 120 temperature = 130 °C; easy flowing; high gloss; brilliant colors; Impact resistant, Heat resistant | Injection molding |
| PC ABS | T95 MF | Covestro | Bayblend | Medium Flow Grade.9 % mineral filled; Vicat/B 120 temperature = 142 °C; very good heat resistance; reduced coefficient of thermal expansion; tensile modulus = 3350 MPa; Dimensionally stable, Heat resistant | Injection molding |
| PC ABS | T45 PG RE | Covestro | Bayblend | Electroplating grade.Vicat/B 120 temperature = 112 °C;Impact resistant, CQ renewable attributed | Injection molding; Electroplating |
| PC ABS | T70 X RE | Covestro | Bayblend | General Purpose Grade. Vicat/B 120 temperature = 124 °C; good injection molding processing behaviour (easy flowing); excellent long-term ageing behaviour under humid conditions; good painting performance; improved chemical resistance; low VOC emissions and odour | Injection molding; General purpose |
| PC ABS | T85 XF RE | Covestro | Bayblend | High flow grade. Vicat/B 120 temperature = 130 °C; improved flow compared with Bayblend® T85; Impact resistant, CQ renewable attributed, Heat resistant | Injection molding |
| PC ABS | FR1514 | Covestro | Bayblend | Flame retardant grade.Heat resistant. Vicat/B 120 temperature = 136 °C; ball indentation temperature ≥ 125 °C; UL recognition 94 V-0 at 1.5 mm | Injection molding; Supporting material for energized parts |
| PC ABS | FR3001 | Covestro | Bayblend | Flame Retardant Grade. Vicat/B 120 temperature = 103 °C; UL recognition 94 V-0 at 1.5 mm; glow wire temperature (GWFI): 960 °C at 2.0 mm; Flame retardant | Injection molding |
| PC ABS | FR3002 | Covestro | Bayblend | Flame Retardant Grade. Vicat/B 120 temperature = 99 °C; UL recognition 94 V-0 (1.0 mm); glow wire temperature (GWFI): 960 °C at 2.0 mm | Injection molding; Notebooks and thin-wall applications |
| PC ABS | FR3008 | Covestro | Bayblend | Flame Retardant Grade. Vicat/B 120 temperature = 103 °C; improved chemical resistance; HDT/A ≥ 85 °C; UL recognition 94 V-0 at 1.5 mm; glow wire temperature (GWFI): 960 °C at 2.0 mm; good light stability | Injection molding |
| PC ABS | FR3009 | Covestro | Bayblend | Flame Retardant Grade. Vicat/B 120 temperature = 103 °C; UL recognition 94 5VB at 1.8 mm; Improved hydrolysis resistance | Injection molding |
| PC ABS | FR3013 | Covestro | Bayblend | Flame Retardant Grade. impact modified; easy flowing; Vicat/B 120 temperature = 95 °C | Injection molding; Information technology |
| PC ABS | FR3025 | Covestro | Bayblend | Flame Retardant Grade. impact modified; mineral filled; Vicat/B 120 temperature = 102 °C; UL recognition 94 V-0 at 1.2 mm; low warpage; improved stiffness and surface quality | Injection molding; Notebooks and thinwall applications |
| PC ABS | FR3030 | Covestro | Bayblend | Flame Retardant Grade. Vicat/B 120 temperature = 115°C; good extrusion and vacuum-forming behaviour; UL recognition 94 V-0 at 1.5 mm; glow wire temperature (GWFI): 960 °C at 1.0 mm | Extrusion |
| PC ABS | FR630 GR | Covestro | Bayblend | Flame Retardant Grade. Vicat/B 120 temperature = 108 °C; UL recognition 94 V-0 at 1.5 mm | Injection molding; Housing; Information technology |
| PC ABS | FR3000 HI | Covestro | Bayblend | Flame Retardant Grade. Vicat/B 120 temperature = 97 °C; compared to Bayblend® FR3000 improved chemical resistance and stress cracking behavior; UL recognition 94 V-0 at 1.5 mm; Impact resistant, Chemical resistant | Injection molding |
| PC ABS | FR3006 HF | Covestro | Bayblend | Flame Retardant Grade. Vicat/B 120 temperature = 108 °C; easy flowing version of Bayblend® FR3006; increased heat resistance; UL recognition 94 V-1 at 1.5 mm, V-0 at 1.8 mm and 5VB at 1.8 mm | Injection molding |
| PC ABS | FR3008 HR | Covestro | Bayblend | Flame Retardant Grade. impact modified;Vicat/B 120 temperature = 103 °C; very good hydrolysis resistance | Injection molding |
| PC ABS | FR3008 RE | Covestro | Bayblend | Flame Retardant Grade. Vicat/B 120 temperature = 103 °C; improved chemical resistance; HDT/A ≥ 85 °C; UL recognition 94 V-0 at 1.5 mm; glow wire temperature (GWFI): 960 °C at 2.0 mm; good light stability | Injection molding |
| PC ABS | FR3010 HF | Covestro | Bayblend | Flame Retardant Grade. easy flowing; Vicat/B 120 temperature = 108 °C; UL recognition 94 V-0 at 1.5 mm; glow wire temperature (GWFI): 960 °C at 2.0 mm; optimized processability; good light stability | Injection molding |
| PC ABS | FR3021 GR | Covestro | Bayblend | Flame Retardant Grade. 15 % mineral filled;Vicat/B 120 temperature = 97 °C; increased stiffness; tensile modulus = 4600 MPa; UL recognition 94 V-0 at 1.5 mm; Dimensionally stable, Flame retardant, CQ mechanical recycled | Injection molding |
| PC ABS | FR3040 R35 | Covestro | Bayblend | Flame Retardant Grade. CQ mechanical recycled | Injection molding; Notebooks and thin-wall applications |
| PC ABS | FR3110 TV | Covestro | Bayblend | Flame Retardant Grade. easy flowing; Vicat/B 120 temperature = 110 °C; increased heat resistance; UL recognition 94 V-0 at 1.5 mm | Injection molding |
| PC ABS | FR3200 TV | Covestro | Bayblend | Flame Retardant Grade. easy flowing; Vicat/B 120 temperature = 96 °C; UL recognition 94 V-0 at 1.2 mm | Injection molding |
| PC ABS | FR3210 TV | Covestro | Bayblend | Flame Retardant Grade. easy flowing; Vicat/B 120 temperature = 93 °C; improved surface quality; UL recognition 94 V-0 at 1.2 mm | Injection molding |
| PC ABS | FR3311 TV | Covestro | Bayblend | Flame Retardant Grade. 15 % glass fibre reinforced;easy flowing; Vicat/B 120 temperature = 96 °C; UL recognition 94 V-1 at 1.2 mm and V-0 at 1.5 mm | Injection molding |
| PC ABS | M301 FR | Covestro | Bayblend | Flame Retardant Grade. Vicat/B 120 temperature = 105 °C; Manufactured according to GMP; tested only according to ISO 10993-5 and ISO 10993-10 for contact with uncompromised skin only | Injection molding; Electrical and electronic devices |
| PC ABS | FR3020 W BBS910 | Covestro | Bayblend | Flame Retardant Grade. impact modified; 5 % mineral filled; flame retardant; UV-stabilized; Vicat/B 120 temperature = 102 °C; UL recognition 94 V-0 (0.6mm); low smoke density | Injection molding |
| PC ABS | FR3040 W RE | Covestro | Bayblend | Flame Retardant Grade.impact modified; flame retardant; CQ renewable attributed, CQ mechanical recycled | Injection molding; Notebooks and thin-wall applications |
| PC ABS | M750 | Covestro | Bayblend | (PC+ABS) blend; Vicat/B 120 temperature = 126 °C; meet certain requirements of ISO Standard 10993-1 | Injection molding; Medical devices |
| PC ABS | M303 FR | Covestro | Bayblend | Flame Retardant Grade. Vicat/B 120 temperature = 115 °C; Manufactured according to GMP; tested only according to ISO 10993-5 and ISO 10993-10 for contact with uncompromised skin only | Injection molding; Extrusion; Electrical and electronic devices |
| PC ABS | M850 XF | Covestro | Bayblend | (PC+ABS) blend; easy flowing; Vicat/B 120 temperature = 131 °C; meet certain requirements of ISO Standard 10993-1 | Injection molding; Medical devices |
| PC ABS | M750 RE CQ | Covestro | Bayblend | General Purpose Grade. Vicat/B 120 temperature = 126 °C; meet certain requirements of ISO Standard 10993-1;Medical, CQ renewable attributed | Injection molding; Medical devices |
| PC ABS | M850 XF RE | Covestro | Bayblend | easy flowing; Vicat/B 120 temperature = 131 °C; meet certain requirements of ISO Standard 10993-1; Medical, CQ renewable attributed | Injection molding; Medical devices |