Plastic Granules
Bayblend® FR3000 HI PC/ABS Resin
Bayblend FR3000 HI is a flame-retardant PC+ABS resin, delivering UL 94 V-0 certification at 1.5 mm thickness. It excels in impact resistance, chemical stability, and thermal performance (Vicat 97°C). Ideal for demanding electrical/automotive components where safety and durability are critical.
Download PDF
ISO TDS
Typical property data
Physical Properties (Rheological)
- Melt volume-flow rate: 20 cm³/10 min (240 °C/5 kg, ISO 1133)
- Melt viscosity: 185 Pa·s (1000 s⁻¹, 260 °C, ISO 11443-A)
- Molding shrinkage:
- Parallel: 0.5–0.7% (240 °C, ISO 2577)
- Normal: 0.5–0.7% (240 °C, ISO 2577)
Mechanical Properties (23 °C/50% r.h.)
- Tensile modulus: 2700 MPa (1 mm/min, ISO 527-1,-2)
- Yield stress: 60 MPa (50 mm/min, ISO 527-1,-2)
- Yield strain: 4.0% (50 mm/min, ISO 527-1,-2)
- Izod notched impact strength:
- 23 °C: 35 kJ/m² (ISO 180/A)
- -30 °C: 10 kJ/m² (ISO 180/A)
Thermal Properties
- Heat deflection temperature (HDT):
- 1.80 MPa: 82 °C (ISO 75-1,-2)
- 0.45 MPa: 92 °C (ISO 75-1,-2)
- Vicat softening temperature:
- 50 N, 50 °C/h: 95 °C (ISO 306)
- 50 N, 120 °C/h: 97 °C (ISO 306)
- Coefficient of linear thermal expansion:
- Parallel: 7.6×10−57.6 \times 10^{-5}7.6×10−5 K⁻¹ (23–55 °C, ISO 11359-1,-2)
- Normal: 8.0×10−58.0 \times 10^{-5}8.0×10−5 K⁻¹ (23–55 °C, ISO 11359-1,-2)
- Flammability ratings:
- UL 94 V-0 (1.5 mm)
- UL 94 5VB (2.0 mm)
- UL 94 5VA (3.0 mm)
Electrical Properties (23 °C/50% r.h.)
- Relative permittivity:
- 100 Hz: 3.2 (IEC 60250)
- 1 MHz: 3.1 (IEC 60250)
- Dissipation factor:
- 100 Hz: 5.0×10−35.0 \times 10^{-3}5.0×10−3 (IEC 60250)
- 1 MHz: 6.0×10−36.0 \times 10^{-3}6.0×10−3 (IEC 60250)
- Volume resistivity: 1×1014 Ω⋅m1 \times 10^{14}\, \Omega·m1×1014Ω⋅m (IEC 62631-3-1)
- Surface resistivity: 1×1016 Ω1 \times 10^{16}\, \Omega1×1016Ω (IEC 62631-3-2)
- Electrical strength: 35 kV/mm (IEC 60243-1)
- Comparative tracking index (CTI): 350 (Solution A, IEC 60112)
Other Properties (23 °C)
- Density: 1180 kg/m³ (ISO 1183-1)
- Water absorption:
- Saturation value: 0.5% (ISO 62)
- Equilibrium value: 0.2% (23 °C, 50% r.h., ISO 62)
Processing Guide
Injection molding conditions:
- Melt temperature: 240–270 °C (Standard: 260 °C, ISO 294)
- Mold temperature: 60–80 °C (ISO 294)
- Hold pressure (% of injection pressure): 50–75%
- Drying conditions (Dry air dryer):
- Temperature: 80 °C
- Time: 4 hours
- Max moisture content: ≤ 0.02%
Use & Applications
- Electrical: Circuit breakers, switchgear, connector housings
- Automotive: Battery covers, sensor housings, interior trim
- Consumer Electronics: Power tool casings, charger enclosures
- Industrial: Control panels, safety equipment housings
Features & Benefits
Uncompromised Flame Safety
It achieves UL 94 V-0 at just 1.5 mm thickness, preventing flame spread in high-risk environments like electronics housings. Ensures compliance with strict safety regulations.
Enhanced Durability & Resistance
Superior impact strength (35 kJ/m²) and chemical resistance reduce stress cracking and part failure in harsh industrial settings. Lowers maintenance costs.
Reliable Thermal Stability
It withstands 97°C (Vicat B120), ensuring dimensional stability in heat-exposed applications like automotive interiors or power tools.