Yuehua Baling Chemical YH400
Plastic Granules
YH400 PA6 Low Viscosity Injection Molding Pellets
Yuehua YH400 is a PA6 Nylon 6 resin from Hunan Yuehua Chemical. It offers good flowability, 2.4 relative viscosity, and 220°C melting point. Ideal for extrusion, injection molding, high glass-fiber PA6 modification, and spinning.
Associated Documents
TDS - Data Sheet
Typical property data
Physical Properties
- Density: 1.15 g/cm³ (GB/T 1103-1986)
- Relative Viscosity: 2.4 (FZ/T 51004-2011)
- Monomer Content: ≤0.5% (FZ/T 51004-2011)
- Moisture Content: ≤0.065% (FZ/T 51004-2011)
Mechanical Properties
- Tensile Strength: 70.0 MPa (GB/T 1040-92)
- Flexural Strength: 95.0 MPa (GB/T 1040-88)
- Flexural Modulus: 2200 MPa (GB/T 1040-88)
- Notched Impact Strength: 5.0 kJ/m² (GB/T 1043-93)
Thermal Properties
- Melting Point: 220°C
- Melt Index: 58.0 (GB/T 3682)
Processing Guide
- Flowability: Good
- Processing Cleanliness: Avoid dust and foreign matter
- Residence Time: Avoid long melt residence in barrel
- Hot Runner Temperature: Avoid excessive temperature
- Moisture Control: Required during high-temperature processing
- Processing Use: General PA6 molding, glass-fiber reinforcement, spinning
Use & Applications
- general-purpose PA6 processing
- high glass-fiber reinforced modification
- spinning