XENOY™ Resin PC PBT 6370
Plastic Granules
XENOY™ Resin PC PBT 6370
XENOY™ Resin 6370 is a 30% glass-reinforced PC/PBT alloy. It offers high stiffness, improved toughness, and good ductility. Key values include 9750 MPa tensile modulus, 170 J/m notched Izod impact, and 204°C HDT. Suitable for injection-molded parts.
Typical property data
Physical Properties
- Specific Gravity: 1.44 (ASTM D792)
- Specific Volume: 0.7 cm³/g (ASTM D792)
- Density: 1.44 g/cm³ (ISO 1183)
- Water Absorption, 23°C/24 hrs: 0.09% (ASTM D570)
- Water Absorption, 23°C/saturated: 0.5% (ISO 62-1)
- Moisture Absorption, 23°C/50% RH: 0.15% (ISO 62)
- Mold Shrinkage, Flow, 0.75–2.3 mm: 0.3–0.4% (SABIC Method)
- Mold Shrinkage, Flow, 2.3–4.6 mm: 0.4–0.5% (SABIC Method)
- Mold Shrinkage, Cross Flow, 0.75–2.3 mm: 0.4–0.7% (SABIC Method)
- Mold Shrinkage, Cross Flow, 2.3–4.6 mm: 0.7–0.9% (SABIC Method)
- Melt Flow Rate, 250°C/5.0 kgf: 24 g/10 min (ASTM D1238)
- Melt Volume Rate, 250°C/5.0 kg: 12 cm³/10 min (ISO 1133)
- Melt Volume Rate, 265°C/5.0 kg: 19 cm³/10 min (ISO 1133)
Mechanical Properties
- Tensile Stress at Yield, Type I, 5 mm/min: 97 MPa (ASTM D638)
- Tensile Stress at Break, Type I, 5 mm/min: 91 MPa (ASTM D638)
- Tensile Strain at Yield, Type I, 5 mm/min: 3% (ASTM D638)
- Tensile Strain at Break, Type I, 5 mm/min: 4% (ASTM D638)
- Tensile Modulus, 5 mm/min: 9750 MPa (ASTM D638)
- Flexural Stress at Yield, 1.3 mm/min, 50 mm span: 150 MPa (ASTM D790)
- Flexural Stress at Break, 1.3 mm/min, 50 mm span: 138 MPa (ASTM D790)
- Flexural Modulus, 1.3 mm/min, 50 mm span: 5370 MPa (ASTM D790)
- Hardness, Rockwell R: 109 (ASTM D785)
- Tensile Stress at Yield, 5 mm/min: 105 MPa (ISO 527)
- Tensile Stress at Break, 5 mm/min: 105 MPa (ISO 527)
- Tensile Strain at Yield, 5 mm/min: 3% (ISO 527)
- Tensile Strain at Break, 5 mm/min: 3% (ISO 527)
- Tensile Modulus, 1 mm/min: 8500 MPa (ISO 527)
- Flexural Stress at Yield, 2 mm/min: 154 MPa (ISO 178)
- Flexural Modulus, 2 mm/min: 7750 MPa (ISO 178)
Impact Properties
- Izod Impact, Unnotched, 23°C: 640 J/m (ASTM D4812)
- Izod Impact, Notched, 23°C: 170 J/m (ASTM D256)
- Izod Impact, Notched, -30°C: 112 J/m (ASTM D256)
- Instrumented Dart Impact Energy at Peak, 23°C: 5 J (ASTM D3763)
- Instrumented Dart Impact Total Energy, 23°C: 17 J (ASTM D3763)
- Izod Impact, Notched, 80 × 10 × 4 mm, +23°C: 10 kJ/m² (ISO 180/1A)
- Izod Impact, Notched, 80 × 10 × 4 mm, -30°C: 6 kJ/m² (ISO 180/1A)
- Charpy Impact, V-Notch Edgewise, 23°C, 80 × 10 × 4 mm, span 62 mm: 9 kJ/m² (ISO 179/1eA)
Thermal Properties
- Vicat Softening Temperature, Rate B/50: 153°C (ASTM D1525)
- Vicat Softening Temperature, Rate B/50: 148°C (ISO 306)
- Vicat Softening Temperature, Rate B/120: 150°C (ISO 306)
- HDT, 1.82 MPa, 3.2 mm, Unannealed: 163°C (ASTM D648)
- HDT, 0.45 MPa, 6.4 mm, Unannealed: 204°C (ASTM D648)
- HDT, 1.82 MPa, 6.4 mm, Unannealed: 149°C (ASTM D648)
- HDT/Af, 1.8 MPa Flatwise, 80 × 10 × 4 mm, span 64 mm: 155°C (ISO 75/Af)
- CTE, -40°C to 40°C, Flow: 2.7E-05 1/°C (ASTM E831)
- CTE, -40°C to 40°C, Cross Flow: 1.1E-04 1/°C (ASTM E831)
- CTE, 60°C to 138°C, Flow: 1.98E-05 1/°C (ASTM E831)
- CTE, -40°C to 40°C, Flow: 2.7E-05 1/°C (ISO 11359-2)
- CTE, -40°C to 40°C, Cross Flow: 1.1E-04 1/°C (ISO 11359-2)
- Relative Temperature Index, Electrical: 140°C (UL 746B)
- Relative Temperature Index, Mechanical with Impact: 130°C (UL 746B)
- Relative Temperature Index, Mechanical without Impact: 140°C (UL 746B)
Electrical Properties
- Volume Resistivity: 4.8E+15 Ω·cm (ASTM D257)
- Dielectric Strength, in Air, 3.2 mm: 20 kV/mm (ASTM D149)
- Dielectric Strength, in Oil, 1.6 mm: 27 kV/mm (ASTM D149)
- Relative Permittivity, 100 Hz: 4 (ASTM D150)
- Relative Permittivity, 1 MHz: 4 (ASTM D150)
- Dissipation Factor, 100 Hz: 0.003 (ASTM D150)
- Dissipation Factor, 1 MHz: 0.02 (ASTM D150)
- Arc Resistance, Tungsten: PLC 5 (ASTM D495)
- Hot Wire Ignition: PLC 1 (UL 746A)
- High Voltage Arc Tracking Rate: PLC 1 (UL 746A)
- High Ampere Arc Ignition, Surface: PLC 3 (UL 746A)
- Comparative Tracking Index: PLC 2 (UL 746A)
Flame Characteristics
- UL Recognized Flame Class Rating, 94HB: 1.5 mm (UL 94)
Injection molding Processing
- Drying Temperature: 110°C
- Drying Time: 4–6 hrs
- Drying Time, Cumulative: 8 hrs
- Maximum Moisture Content: 0.02%
- Melt Temperature: 260–280°C
- Nozzle Temperature: 255–275°C
- Front Zone 3 Temperature: 260–280°C
- Middle Zone 2 Temperature: 255–275°C
- Rear Zone 1 Temperature: 250–270°C
- Mold Temperature: 65–95°C
- Back Pressure: 0.3–0.6 MPa
- Screw Speed: 50–80 rpm
- Shot to Cylinder Size: 50–80%
- Vent Depth: 0.013–0.02 mm
Use & Applications
- Reinforced automotive parts
- structural housings
- brackets
- injection-molded components requiring stiffness and toughness