XENOY™ Resin PC PBT HTX575
Plastic Granules
XENOY™ Resin HTX575 Reinforced PC PBT Resin 30% Glass Fiber
XENOY™ Resin HTX575 is a 30% glass fiber reinforced PC/PBT resin. It offers high strength, stiffness, and heat resistance. With 220°C HDT and 10,000 MPa tensile modulus, it suits EV parts, e-coating parts, structures, FEM, GOR, and grill shutters.
Associated Documents
TDS - Americas
Typical property data
Physical Properties
- Specific Gravity: 1.54 (ASTM D792)
- Density: 1.54 g/cm³ (ISO 1183)
- Filler Content: 30% (ASTM D229)
- Mold Shrinkage, Flow: 0.3–0.7% (SABIC method)
- Mold Shrinkage, Cross Flow: 0.5–1.0% (SABIC method)
- Melt Flow Rate, 266°C/5.0 kgf: 50 g/10 min (ASTM D1238)
- Water Absorption, 23°C/Saturated: 0.26% (ISO 62-1)
- Moisture Absorption, 23°C/50% RH: 0.06% (ISO 62)
- Melt Volume Rate, 250°C/2.16 kg: 12 cm³/10 min (ISO 1133)
- Melt Volume Rate, 250°C/5.0 kg: 30 cm³/10 min (ISO 1133)
- Melt Volume Rate, 265°C/5.0 kg: 40 cm³/10 min (ISO 1133)
- Melt Viscosity, 260°C, 1500 sec⁻¹: 150 Pa·s (ISO 11443)
Mechanical Properties
- Tensile Stress at Yield, Type I, 5 mm/min: 140 MPa (ASTM D638)
- Tensile Stress at Break, Type I, 5 mm/min: 140 MPa (ASTM D638)
- Tensile Strain at Yield, Type I, 5 mm/min: 3% (ASTM D638)
- Tensile Strain at Break, Type I, 5 mm/min: 3% (ASTM D638)
- Tensile Modulus, 5 mm/min: 10000 MPa (ASTM D638)
- Flexural Stress at Yield, 1.3 mm/min, 50 mm Span: 190 MPa (ASTM D790)
- Flexural Stress at Break, 1.3 mm/min, 50 mm Span: 190 MPa (ASTM D790)
- Flexural Modulus, 1.3 mm/min, 50 mm Span: 7900 MPa (ASTM D790)
- Tensile Stress at Yield, 5 mm/min: 135 MPa (ISO 527)
- Tensile Stress at Break, 5 mm/min: 135 MPa (ISO 527)
- Tensile Strain at Yield, 5 mm/min: 2% (ISO 527)
- Tensile Strain at Break, 5 mm/min: 2% (ISO 527)
- Tensile Modulus, 1 mm/min: 10000 MPa (ISO 527)
- Flexural Stress at Yield, 2 mm/min: 210 MPa (ISO 178)
- Flexural Stress at Break, 2 mm/min: 200 MPa (ISO 178)
- Flexural Strain at Break, 2 mm/min: 3% (ISO 178)
- Flexural Modulus, 2 mm/min: 8300 MPa (ISO 178)
- Ball Indentation Hardness, H358/30: 125 MPa (ISO 2039-1)
- Rockwell Hardness R: 125 (ISO 2039-2)
Impact Properties
- Charpy Impact, Unnotched, 23°C: 65 kJ/m² (ISO 179/2C)
- Charpy Impact, Unnotched, -30°C: 60 kJ/m² (ISO 179/2C)
- Izod Impact, Unnotched, 23°C: 880 J/m (ASTM D4812)
- Izod Impact, Unnotched, -30°C: 880 J/m (ASTM D4812)
- Izod Impact, Notched, 23°C: 100 J/m (ASTM D256)
- Izod Impact, Notched, 0°C: 100 J/m (ASTM D256)
- Izod Impact, Notched, -30°C: 100 J/m (ASTM D256)
- Izod Impact, Unnotched, 80 × 10 × 4 mm, +23°C: 55 kJ/m² (ISO 180/1U)
- Izod Impact, Unnotched, 80 × 10 × 4 mm, -30°C: 55 kJ/m² (ISO 180/1U)
- Izod Impact, Notched, 80 × 10 × 4 mm, +23°C: 11 kJ/m² (ISO 180/1A)
- Izod Impact, Notched, 80 × 10 × 4 mm, 0°C: 11 kJ/m² (ISO 180/1A)
- Izod Impact, Notched, 80 × 10 × 4 mm, -30°C: 10 kJ/m² (ISO 180/1A)
- Charpy Impact, V-Notch Edgewise, 80 × 10 × 4 mm, 23°C: 7 kJ/m² (ISO 179/1eA)
- Charpy Impact, Notched, 23°C: 12 kJ/m² (ISO 179/2C)
- Charpy Impact, V-Notch Edgewise, 80 × 10 × 4 mm, -30°C: 6 kJ/m² (ISO 179/1eA)
- Charpy Impact, Notched, -30°C: 12 kJ/m² (ISO 179/2C)
- Charpy Impact, Unnotched Edgewise, 80 × 10 × 4 mm, 23°C: 50 kJ/m² (ISO 179/1eU)
- Charpy Impact, Unnotched Edgewise, 80 × 10 × 4 mm, -30°C: 55 kJ/m² (ISO 179/1eU)
Thermal Properties
- Vicat Softening Temperature, Rate A/50: 220°C (ASTM D1525)
- Vicat Softening Temperature, Rate B/50: 215°C (ASTM D1525)
- HDT, 0.45 MPa, 3.2 mm, Unannealed: 220°C (ASTM D648)
- HDT, 1.82 MPa, 3.2 mm, Unannealed: 205°C (ASTM D648)
- CTE, -40°C to 40°C, Flow: 2.1E-05 1/°C (ISO 11359-2)
- CTE, -40°C to 40°C, Cross Flow: 7.4E-05 1/°C (ISO 11359-2)
- CTE, 23°C to 80°C, Flow: 3.0E-05 1/°C (ISO 11359-2)
- CTE, 23°C to 80°C, Cross Flow: 1.2E-04 1/°C (ISO 11359-2)
- CTE, 23°C to 150°C, Flow: 1.98E-05 1/°C (ISO 11359-2)
- CTE, 23°C to 150°C, Cross Flow: 1.73E-04 1/°C (ISO 11359-2)
- Ball Pressure Test, 125°C ± 2°C: PASS (IEC 60695-10-2)
- Vicat Softening Temperature, Rate A/50: 220°C (ISO 306)
- Vicat Softening Temperature, Rate B/50: 215°C (ISO 306)
- Vicat Softening Temperature, Rate B/120: 215°C (ISO 306)
- HDT/Be, 0.45 MPa, Edgewise, 120 × 10 × 4 mm: 220°C (ISO 75/Be)
- HDT/Ae, 1.8 MPa, Edgewise, 120 × 10 × 4 mm: 210°C (ISO 75/Ae)
- HDT/Bf, 0.45 MPa, Flatwise, 80 × 10 × 4 mm: 220°C (ISO 75/Bf)
- HDT/Af, 1.8 MPa, Flatwise, 80 × 10 × 4 mm: 205°C (ISO 75/Af)
- Relative Temperature Index, Electrical: 140°C (UL 746B)
- Relative Temperature Index, Mechanical with Impact: 140°C (UL 746B)
- Relative Temperature Index, Mechanical without Impact: 140°C (UL 746B)
Electrical Properties
- Volume Resistivity: >1.0E+15 Ω·cm (ASTM D257)
- Dielectric Strength, in Oil, 0.8 mm: 26 kV/mm (ASTM D149)
- Dielectric Strength, in Oil, 1.6 mm: 24 kV/mm (ASTM D149)
- Dielectric Strength, in Oil, 3.2 mm: 18 kV/mm (ASTM D149)
- Arc Resistance, Tungsten: PLC Code 5 (ASTM D495)
- Hot Wire Ignition: PLC Code 1 (UL 746A)
- High Voltage Arc Track Rate: PLC Code 1 (UL 746A)
- High Ampere Arc Ignition, Surface: PLC Code 1 (UL 746A)
- Comparative Tracking Index, UL: PLC Code 0 (UL 746A)
- Volume Resistivity: >1.0E+15 Ω·cm (IEC 60093)
- Surface Resistivity, ROA: >1.0E+15 Ω (IEC 60093)
- Dielectric Strength, in Oil, 0.8 mm: 26 kV/mm (IEC 60243-1)
- Dielectric Strength, in Oil, 1.6 mm: 24 kV/mm (IEC 60243-1)
- Dielectric Strength, in Oil, 3.2 mm: 15 kV/mm (IEC 60243-1)
- Relative Permittivity, 1 MHz: 3.1 (IEC 60250)
- Relative Permittivity, 50/60 Hz: 3.3 (IEC 60250)
- Dissipation Factor, 50/60 Hz: 0.0016 (IEC 60250)
- Dissipation Factor, 1 MHz: 0.014 (IEC 60250)
- Comparative Tracking Index: 250 V (IEC 60112)
Flame Characteristics
- Glow Wire Flammability Index, 750°C, Passes at: 1 mm (IEC 60695-2-12)
- Ball Pressure Test, 125°C ± 2°C: PASS (IEC 60695-10-2)
Injection molding Processing
- Drying Temperature: 110–120°C
- Drying Time: 2–4 hrs
- Maximum Moisture Content: 0.02%
- Melt Temperature: 250–270°C
- Nozzle Temperature: 240–260°C
- Front Zone 3 Temperature: 245–265°C
- Middle Zone 2 Temperature: 240–255°C
- Rear Zone 1 Temperature: 230–245°C
- Hopper Temperature: 40–60°C
- Mold Temperature: 40–100°C
Use & Applications
- E-coating capable molded parts
- EV components
- Front-end modules
- Grille opening reinforcements
- Structures
- Grille shutters