XENOY™ Resin T2NX2500UV PC PET
Plastic Granules
XENOY™ Resin T2NX2500UV Elastomer Modified PC/PET Blend
XENOY™ Resin T2NX2500UV is a UV-stabilized, elastomer-modified PC/PET blend with 21 wt% recycled content. It offers 600 J/m notched Izod impact, 108°C HDT, and stable molding flow for durable injection molded parts.
Associated Documents
TDS - Europe
Typical property data
Physical Properties
- Specific Gravity: 1.21 (ASTM D792)
- Density: 1.21 g/cm³ (ISO 1183)
- Melt Flow Rate: 9 g/10 min at 265°C/2.16 kgf (ASTM D1238)
- Melt Volume Rate: 4 cm³/10 min at 265°C/1.2 kg (ISO 1133)
- Mold Shrinkage, Flow: 0.5–0.8% on tensile bar (SABIC method)
- Mold Shrinkage, Flow: 0.5–0.8% at 3.2 mm (SABIC method)
- Mold Shrinkage, Cross Flow: 0.5–0.8% on tensile bar (SABIC method)
- Water Absorption: 0.7% at 23°C/saturated (ISO 62-1)
- Moisture Absorption: 0.2% at 23°C/50% RH (ISO 62)
Mechanical Properties
- Tensile Stress at Yield: 53 MPa (ASTM D638)
- Tensile Stress at Yield, Type I, 50 mm/min: 56 MPa (ASTM D638)
- Tensile Stress at Break, Type I, 50 mm/min: 55 MPa (ASTM D638)
- Tensile Strain at Yield: 5% (ASTM D638)
- Tensile Strain at Break: 100% (ASTM D638)
- Tensile Strain at Yield, Type I, 50 mm/min: 5% (ASTM D638)
- Tensile Strain at Break, Type I, 50 mm/min: 80% (ASTM D638)
- Tensile Modulus, 50 mm/min: 2200 MPa (ASTM D638)
- Flexural Stress: 79 MPa (ASTM D790)
- Flexural Stress at Yield, 1.3 mm/min, 50 mm Span: 79 MPa (ASTM D790)
- Flexural Modulus: 2100 MPa (ASTM D790)
- Flexural Modulus, 1.3 mm/min, 50 mm Span: 2150 MPa (ASTM D790)
- Taber Abrasion, CS-17, 1 kg: 20 mg/1000 cycles (SABIC method)
- Tensile Stress at Yield, 50 mm/min: 57 MPa (ISO 527)
- Tensile Stress at Break, 50 mm/min: 56 MPa (ISO 527)
- Tensile Strain at Yield, 50 mm/min: 5% (ISO 527)
- Tensile Strain at Break, 50 mm/min: 70% (ISO 527)
- Tensile Modulus, 1 mm/min: 2200 MPa (ISO 527)
- Flexural Stress at Yield, 2 mm/min: 80 MPa (ISO 178)
- Flexural Modulus, 2 mm/min: 2150 MPa (ISO 178)
- Ball Indentation Hardness, H358/30: 95 MPa (ISO 2039-1)
Impact Properties
- Notched Izod Impact at 23°C: 600 J/m (ASTM D256)
- Notched Izod Impact at 0°C: 450 J/m (ASTM D256)
- Notched Izod Impact at -30°C: 200 J/m (ASTM D256)
- Instrumented Dart Impact Total Energy at 23°C: 60 J (ASTM D3763)
- Unnotched Izod Impact, 80 × 10 × 4 mm at -30°C: NB kJ/m² (ISO 180/1U)
- Notched Izod Impact, 80 × 10 × 4 mm at 23°C: 40 kJ/m² (ISO 180/1A)
- Notched Izod Impact, 80 × 10 × 4 mm at -30°C: 25 kJ/m² (ISO 180/1A)
- Notched Izod Impact, 80 × 10 × 4 mm at -40°C: 15 kJ/m² (ISO 180/1A)
- Charpy V-Notch Impact, Edgewise, 80 × 10 × 4 mm, 62 mm Span at 23°C: 50 kJ/m² (ISO 179/1eA)
- Charpy V-Notch Impact, Edgewise, 80 × 10 × 4 mm, 62 mm Span at -30°C: 30 kJ/m² (ISO 179/1eA)
- Charpy Unnotched Impact, Edgewise, 80 × 10 × 4 mm, 62 mm Span at -30°C: NB kJ/m² (ISO 179/1eU)
Thermal Properties
- Vicat Softening Temperature, Rate B/50: 135°C (ASTM D1525)
- Heat Deflection Temperature, 1.82 MPa, 3.2 mm, Unannealed: 108°C (ASTM D648)
- Coefficient of Thermal Expansion, Flow, -40°C to 40°C: 8.5E-05 1/°C (ASTM E831)
- Coefficient of Thermal Expansion, Cross Flow, -40°C to 40°C: 8.5E-05 1/°C (ASTM E831)
- Thermal Conductivity: 0.18 W/m·°C (ISO 8302)
- Coefficient of Thermal Expansion, Flow, 23°C to 80°C: 8.2E-05 1/°C (ISO 11359-2)
- Coefficient of Thermal Expansion, Cross Flow, 23°C to 80°C: 8.7E-05 1/°C (ISO 11359-2)
- Ball Pressure Test at 125°C ± 2°C: Passes (IEC 60695-10-2)
- Vicat Softening Temperature, Rate A/50: 145°C (ISO 306)
- Vicat Softening Temperature, Rate B/50: 135°C (ISO 306)
- Vicat Softening Temperature, Rate B/120: 136°C (ISO 306)
- Heat Deflection Temperature, HDT/Af, 1.8 MPa, Flatwise, 80 × 10 × 4 mm, 64 mm Span: 108°C (ISO 75/Af)
Electrical Properties
- Volume Resistivity: 1.0E+14 Ω·cm (IEC 60093)
- Surface Resistivity, ROA: 1.0E+15 Ω (IEC 60093)
- Dielectric Strength, In Oil, 3.2 mm: 17 kV/mm (IEC 60243-1)
- Relative Permittivity at 1 MHz: 3.1 (IEC 60250)
- Relative Permittivity at 50/60 Hz: 3.3 (IEC 60250)
- Dissipation Factor at 50/60 Hz: 0.002 (IEC 60250)
- Dissipation Factor at 1 MHz: 0.02 (IEC 60250)
Flame Characteristics
- UL 94 Flame Class Rating: 94HB at 1.5 mm (UL 94 by SABIC-IP)
- Glow Wire Flammability Index: 750°C, passes at 2.7 mm (IEC 60695-2-12)
Injection molding Processing
- Drying Temperature: 110–120°C
- Drying Time: 4–5 hours
- Maximum Moisture Content: 0.02%
- Melt Temperature: 265–275°C
- Nozzle Temperature: 260–275°C
- Front Zone 3 Temperature: 260–280°C
- Middle Zone 2 Temperature: 250–275°C
- Rear Zone 1 Temperature: 240–270°C
- Hopper Temperature: 60–80°C
- Mold Temperature: 60–100°C
Use & Applications
- Automotive and outdoor molded parts requiring UV stability, heat resistance, impact performance, and recycled-content material options.