XENOY™ Resin X4870HH PC PET
Plastic Granules
XENOY™ Resin X4870HH PC PET High Heat High Modulus
XENOY™ Resin X4870HH is a high-heat PC/PET blend with 4600 MPa tensile modulus and 132°C HDT at 0.45 MPa. It offers ductility, chemical resistance, low creep, low CTE, and strong dimensional stability for body panels, housings, medical enclosures, and outdoor sports equipment.
Associated Documents
TDS - Americas
Typical property data
Physical Properties
- Specific Gravity: 1.34 (ASTM D792)
- Density: 1.34 g/cm³ (ISO 1183)
- Mold Shrinkage, flow, 3.2 mm: 0.5–0.7% (SABIC method)
- Melt Flow Rate, 266°C/5.0 kgf: 8 g/10 min (ASTM D1238)
- Melt Volume Rate, MVR at 265°C/5.0 kg: 7 cm³/10 min (ISO 1133)
- Water Absorption, 23°C/saturated: 0.42% (ISO 62-1)
- Moisture Absorption, 23°C/50% RH: 0.14% (ISO 62)
Mechanical Properties
- Tensile Stress, yield, Type I, 50 mm/min: 65 MPa (ASTM D638)
- Tensile Stress, break, Type I, 50 mm/min: 50 MPa (ASTM D638)
- Tensile Stress, yield, Type I, 5 mm/min: 61 MPa (ASTM D638)
- Tensile Stress, break, Type I, 5 mm/min: 45 MPa (ASTM D638)
- Tensile Strain, yield, Type I, 50 mm/min: 3.3% (ASTM D638)
- Tensile Strain, break, Type I, 50 mm/min: 30% (ASTM D638)
- Tensile Strain, yield, Type I, 5 mm/min: 3.7% (ASTM D638)
- Tensile Strain, break, Type I, 5 mm/min: 60% (ASTM D638)
- Tensile Modulus, 5 mm/min: 4600 MPa (ASTM D638)
- Flexural Stress, yield, 1.3 mm/min, 50 mm span: 104 MPa (ASTM D790)
- Flexural Modulus, 1.3 mm/min, 50 mm span: 4250 MPa (ASTM D790)
- Taber Abrasion, CS-17, 1 kg: 30 mg/1000 cycles (SABIC method)
- Tensile Stress, yield, 5 mm/min: 63 MPa (ISO 527)
- Tensile Stress, break, 5 mm/min: 45 MPa (ISO 527)
- Tensile Stress, yield, 50 mm/min: 67 MPa (ISO 527)
- Tensile Stress, break, 50 mm/min: 45 MPa (ISO 527)
- Tensile Strain, yield, 5 mm/min: 3.6% (ISO 527)
- Tensile Strain, break, 5 mm/min: 10% (ISO 527)
- Tensile Strain, yield, 50 mm/min: 3.8% (ISO 527)
- Tensile Strain, break, 50 mm/min: 10% (ISO 527)
- Tensile Modulus, 1 mm/min: 4300 MPa (ISO 527)
- Flexural Stress, yield, 2 mm/min: 98 MPa (ISO 178)
- Flexural Modulus, 2 mm/min: 4000 MPa (ISO 178)
- Ball Indentation Hardness, H358/30: 105 MPa (ISO 2039-1)
Impact Properties
- Izod Impact, notched, 23°C: 90 J/m (ASTM D256)
- Izod Impact, notched, 0°C: 80 J/m (ASTM D256)
- Izod Impact, notched, -30°C: 70 J/m (ASTM D256)
- Multiaxial Impact: 90 J (ISO 6603)
- Instrumented Dart Impact Total Energy, 23°C: 60 J (ASTM D3763)
- Instrumented Impact Total Energy, -20°C: 60 J (ASTM D3763)
- Izod Impact, unnotched, 80 × 10 × 4 mm, +23°C: NB kJ/m² (ISO 180/1U)
- Izod Impact, notched, 80 × 10 × 4 mm, +23°C: 10 kJ/m² (ISO 180/1A)
- Izod Impact, notched, 80 × 10 × 4 mm, -30°C: 6 kJ/m² (ISO 180/1A)
- Charpy Impact, V-notch edgewise, 23°C, 80 × 10 × 4 mm, span 62 mm: 11 kJ/m² (ISO 179/1eA)
- Charpy Impact, V-notch edgewise, -30°C, 80 × 10 × 4 mm, span 62 mm: 7 kJ/m² (ISO 179/1eA)
- Charpy Impact, unnotched edgewise, 23°C, 80 × 10 × 4 mm, span 62 mm: NB kJ/m² (ISO 179/1eU)
Thermal Properties
- Vicat Softening Temperature, Rate B/50: 137°C (ASTM D1525)
- Heat Deflection Temperature, 0.45 MPa, 3.2 mm, unannealed: 132°C (ASTM D648)
- Heat Deflection Temperature, 1.82 MPa, 3.2 mm, unannealed: 113°C (ASTM D648)
- CTE, -40°C to 40°C, flow: 4.3E-05 1/°C (ASTM E831)
- CTE, -40°C to 40°C, cross-flow: 6.4E-05 1/°C (ASTM E831)
- Thermal Conductivity: 0.2 W/m·°C (ISO 8302)
- CTE, -30°C to 80°C, flow: 4.8E-05 1/°C (ISO 11359-2)
- CTE, -30°C to 80°C, cross-flow: 6.8E-05 1/°C (ISO 11359-2)
- Vicat Softening Temperature, Rate B/50: 137°C (ISO 306)
- Vicat Softening Temperature, Rate B/120: 139°C (ISO 306)
- HDT/Bf, 0.45 MPa, flatwise, 80 × 10 × 4 mm, span 64 mm: 131°C (ISO 75/Bf)
- HDT/Af, 1.8 MPa, flatwise, 80 × 10 × 4 mm, span 64 mm: 113°C (ISO 75/Af)
Injection Molding Processing
- Drying Temperature: 110–120°C
- Drying Time: 4–6 hrs
- Maximum Moisture Content: 0.02%
- Melt Temperature: 265–275°C
- Nozzle Temperature: 260–275°C
- Front Zone 3 Temperature: 260–280°C
- Middle Zone 2 Temperature: 250–275°C
- Rear Zone 1 Temperature: 240–270°C
- Hopper Temperature: 60–80°C
- Mold Temperature: 60–100°C
Use & Applications
- Body panels
- housings
- medical device enclosures
- outdoor sports equipment
- high-heat dimensional-stability applications