XENOY™ Resin XL1562 PC PBT
Plastic Granules
XENOY™ Resin XL1562 Impact Modified PBT+PC Blend
XENOY™ Resin XL1562 is an impact-modified PBT+PC blend. It offers strong chemical resistance, good UV stability, and stable flow. It delivers 54 MPa tensile yield stress, 45 kJ/m² notched Izod impact at 23°C, and 0.8–1.1% mold shrinkage.
Associated Documents
TDS - Europe
Typical property data
Physical Properties
- Density: 1.23 g/cm³ (ISO 1183)
- Mold Shrinkage, flow: 0.8–1.1% (SABIC method)
- Mold Shrinkage, cross-flow: 0.8–1.1% (SABIC method)
- Water Absorption, 23°C saturated: 0.5% (ISO 62-1)
- Moisture Absorption, 23°C / 50% RH: 0.15% (ISO 62)
- Melt Volume Rate, 250°C / 2.16 kg: 9 cm³/10 min (ISO 1133)
- Melt Volume Rate, 250°C / 5.0 kg: 27 cm³/10 min (ISO 1133)
Mechanical Properties
- Tensile Stress at Yield, 50 mm/min: 54 MPa (ISO 527)
- Tensile Stress at Break, 50 mm/min: 42 MPa (ISO 527)
- Tensile Strain at Yield, 50 mm/min: 5% (ISO 527)
- Tensile Strain at Break, 50 mm/min: 100% (ISO 527)
- Tensile Modulus, 1 mm/min: 2100 MPa (ISO 527)
- Flexural Stress at Yield, 2 mm/min: 74 MPa (ISO 178)
- Flexural Modulus, 2 mm/min: 2000 MPa (ISO 178)
- Ball Indentation Hardness, H358/30: 100 MPa (ISO 2039-1)
- Taber Abrasion, CS-17, 1 kg: 30 mg/1000 cycles (SABIC method)
Impact Properties
- Izod Impact, Unnotched, 80 × 10 × 4 mm, +23°C: NB kJ/m² (ISO 180/1U)
- Izod Impact, Unnotched, 80 × 10 × 4 mm, -30°C: NB kJ/m² (ISO 180/1U)
- Izod Impact, Notched, 80 × 10 × 4 mm, +23°C: 45 kJ/m² (ISO 180/1A)
- Izod Impact, Notched, 80 × 10 × 4 mm, -30°C: 18 kJ/m² (ISO 180/1A)
- Charpy Impact, V-notch Edgewise, 80 × 10 × 4 mm, span 62 mm, +23°C: 50 kJ/m² (ISO 179/1eA)
- Charpy Impact, V-notch Edgewise, 80 × 10 × 4 mm, span 62 mm, -30°C: 20 kJ/m² (ISO 179/1eA)
- Charpy Impact, Unnotched Edgewise, 80 × 10 × 4 mm, span 62 mm, +23°C: NB kJ/m² (ISO 179/1eU)
- Charpy Impact, Unnotched Edgewise, 80 × 10 × 4 mm, span 62 mm, -30°C: NB kJ/m² (ISO 179/1eU)
Thermal Properties
- Thermal Conductivity: 0.18 W/m·°C (ISO 8302)
- Coefficient of Thermal Expansion, 23°C to 80°C, flow: 1.1E-04 1/°C (ISO 11359-2)
- Coefficient of Thermal Expansion, 23°C to 80°C, cross-flow: 1.1E-04 1/°C (ISO 11359-2)
- Ball Pressure Test, 125°C ± 2°C: Passes (IEC 60695-10-2)
- Vicat Softening Temperature, Rate A/50: 190°C (ISO 306)
- Vicat Softening Temperature, Rate B/50: 125°C (ISO 306)
- Vicat Softening Temperature, Rate B/120: 128°C (ISO 306)
- HDT/Be, 0.45 MPa, edgewise, 120 × 10 × 4 mm, span 100 mm: 110°C (ISO 75/Be)
- HDT/Ae, 1.8 MPa, edgewise, 120 × 10 × 4 mm, span 100 mm: 80°C (ISO 75/Ae)
Electrical Properties
- Volume Resistivity: >1.0E+14 Ω·cm (IEC 60093)
- Surface Resistivity, ROA: >1.0E+15 Ω (IEC 60093)
- Dielectric Strength, in oil, 0.8 mm: 32 kV/mm (IEC 60243-1)
- Dielectric Strength, in oil, 1.6 mm: 25 kV/mm (IEC 60243-1)
- Dielectric Strength, in oil, 3.2 mm: 17 kV/mm (IEC 60243-1)
- Relative Permittivity, 1 MHz: 2.9 (IEC 60250)
- Relative Permittivity, 50/60 Hz: 2.8 (IEC 60250)
- Dissipation Factor, 50/60 Hz: 0.002 (IEC 60250)
- Dissipation Factor, 1 MHz: 0.02 (IEC 60250)
Flame Characteristics
- UL Recognized, 94HB Flame Class Rating: 1.5 mm (UL 94)
- UL Recognized, 94HB Flame Class Rating, second value: 3 mm (UL 94)
- Glow Wire Flammability Index, 750°C: Passes at 3.2 mm (IEC 60695-2-12)
Injection molding Processing
- Drying Temperature: 90–100°C
- Drying Time: 2–4 hours
- Maximum Moisture Content: 0.02%
- Melt Temperature: 255–270°C
- Nozzle Temperature: 250–265°C
- Front Zone 3 Temperature: 250–270°C
- Middle Zone 2 Temperature: 240–265°C
- Rear Zone 1 Temperature: 230–250°C
- Hopper Temperature: 40–60°C
- Mold Temperature: 60–80°C
Use & Applications
- Automotive exterior parts
- housings
- trims
- molded components requiring chemical resistance, UV stability, and processability