YUNGSOX® PP 1600D Homopolymer
Plastic Granules
YUNGSOX® PP 1600D Homopolymer
YUNGSOX® PP 1600D is a homopolymer PP resin for high-speed thin-wall injection molding. It delivers superhigh fluidity, fast cycling, good luster, and low warpage for efficient production and clean finished parts.
Associated Documents
TDS - Data Sheet
PL JCII Certification
SDS - PPH
BPA - PPH
Haolgen - PPH
PAHs - PPH
REACH SVHC - PPH
RoHS - PPH
EN71-3 - PPH
EU10-2011 - PPH
FDA - PPH
GB4806.6 - PPH
Typical property data
Physical Properties
- Melt Index: 60 g/10 min (ISO 1133 / ASTM D-1238)
- Density: 0.90 g/cm³ (ISO 1183 / ASTM D792)
- Mold Shrinkage: 1.3–1.7% (FPC Method)
Mechanical Properties
- Tensile Strength at Yield: 380 kg/cm² / 37 MPa (ISO 527 / ASTM D-638)
- Tensile Elongation at Break: 50% (ISO 527 / ASTM D-638)
- Rockwell Hardness: 110 R scale (ISO 2039 / ASTM D-785)
- Flexural Modulus: 15,500 kg/cm² / 1,520 MPa (ISO 178 / ASTM D-790)
- IZOD Impact Strength, Notched, 23°C: 3.0 kg·cm/cm / 29 J/m (ISO 180 / ASTM D-256)
- IZOD Impact Strength, Notched, -20°C:
Thermal Properties
- Heat Deflection Temperature: 118°C (ISO 75 / ASTM D-648)
- Vicat Softening Temperature: 153°C (ISO 306)
Processing Parameters
- Recommended Processing: High-speed thin-wall injection molding
- Flow Performance: Superhigh fluidity
- Cycle Performance: Fast cycling
- Dimensional Performance: Low warpage
- Surface Appearance: Good luster
Certifications & Compliance
- FDA Food Contact Compliance: FDA 21 CFR 177.1520 for direct food contact
- JHOSPA-PL Certification
Use & Applications
- High speed thin walled injection molding products
- Storage boxes
- Housewares